Fort Wayne Auto Repair

Why are wheel bearings for Fort Wayne vehicles important? It's simple: your wheel bearings keep the wheels on your vehicle. In today's Ed's Car Care Center post, we'll discuss more about wheel bearings and how you can make sure they can do their very job while you drive around Fort Wayne, IN.

Wheel bearings are pretty simple parts. They're made of high quality steel and are engineered to last 100,000 miles (160,000)  or more if properly cared for. The bearings do two jobs: First, they allow the wheel to freely rotate with as little friction as possible. Second, they support the weight of the vehicle. For example, if your car weighs 3,600 pounds (1600 kilogram), each wheel has to support approximately 900 pounds (400 kilograms). That's a lot of heavy lifting over those long distances.

Even though wheel bearings are pretty straightforward, they need to be in near perfect condition to do their job for Fort Wayne vehicles. The bearings are packed with heavy grease to lubricate and protect them. A seal keeps the grease in and water and dirt out. It's when the seal starts to leak that problems begin. The grease can become contaminated, causing the wheel bearings to overheat and ultimately fail.

The first sign that your wheel bearings are in trouble is an unusual noise coming from a wheel. It could be a chirping, growling, rumbling or a cyclic sound. The noise could get louder or even disappear at certain speeds. Your technician at Ed's Car Care Center can inspect for bearing wear by lifting the vehicle and checking for play in the wheel.

Now some wheel bearing assemblies are factory sealed. That means that they cannot be serviced – they can only be replaced. Those that aren't sealed can be serviced on schedule at Ed's Car Care Center. The bearings are removed, cleaned and inspected. If the bearings are still good, they're re-installed – if not, they're replaced. They are then packed in grease and a new seal is installed.

If your vehicle has a factory sealed wheel bearing assembly, the entire assembly needs to be replaced when trouble arises. Unfortunately, the parts are pretty costly – but they usually last about 150,000 miles (240,000 kilometers) as long as the seals hold up.

Now, even a good seal cannot keep out water that's exerting pressure on the seal. So if you've driven through hub-deep water, your bearings should be cleaned and repacked if they're serviceable. If you have factory sealed bearings, you just need to watch for signs of premature failure. If your wheel bearings can be serviced, your manufacturer's owner's manual will recommend an interval, usually around 30,000 miles (50,000 kilometers).

If you have any sort of trailer, don't forget its wheel bearings. They probably need to be serviced even more frequently. This is especially true for boat trailers that are used to launch the boat by backing it into the water. These should be serviced every year, usually at the end of the season so that the bearings don't have the opportunity to rust all winter.

So what happens to Fort Wayne vehicles if wheel bearings fail? Well, the wheel can literally fall off the vehicle. I don't need to tell you how that could be. So check with your service advisor at Ed's Car Care Center and see if your vehicle's wheel bearings can be serviced and when it's recommended. Listen for warning signs. If you've been fording streams or puddle surfing after rainstorms, be especially vigilant.

Visit the automotive professionals at Ed's Car Care Center for a wheel bearing inspection. 

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com

Have you ever driven a vehicle without power steering? If you have, then you probably appreciate how much easier it is to drive today's modern vehicles. Before power steering, all of the force to turn a vehicle had to come from the driver's arms. That's why old cars had such large steering wheels: they needed plenty of leverage to steer. There were some Fort Wayne folks who had difficulty driving because they just weren't strong enough.

Power steering is now standard on all vehicles, but there are several ways that power can be delivered. Most vehicles use a hydraulic power steering system system. In this system, a serpentine belt from the engine powers a pump that pressurizes the power steering fluid. The pressure activates hydraulics that provides steering power.

Other vehicles use an electric pump to pressurize the power steering fluid rather than the belt-driven pump. Some newer vehicles actually have electric motors that provide steering power and don't use steering fluid at all, especially in the increasingly popular hybrid and electric vehicles.

Fort Wayne drivers who own a vehicle that uses power steering fluid need to have it changed regularly. Over time, moisture accumulates in the power steering fluid, which affects steering performance and can corrode steering components. Dirt and other contaminants can also accumulate in the power steering fluid, which will also negatively affect steering performance. A good power steering service at Ed's Car Care Center in Fort Wayne will flush out the old fluid and get rid of dirt and other deposits in the system. Clean fluid will then be added. Fresh fluid provides lubricants that help protect the steering system as well as prevent corrosion.

For recommendations on how often your power steering fluid should be replaced, consult your owner's manual. It varies by vehicle model and manufacturer. For more auto advice on steering fluid changes—and other preventive maintenance—you can talk with your service advisor at Ed's Car Care Center. You may need to change your fluid more often depending on the driving and weather conditions in your area.

Fort Wayne drivers who believe in good vehicle care will add power steering service to their preventive maintenance schedule. This will prevent damage to your steering system and extend its working life. The old days of double-handed cranking on a huge steering wheel may be over, but our new comfort and convenience are not maintenance-free. Do yourself and your vehicle a favor. Keep the power steering fluid clean.

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com

You know you need new tires, but you're not sure what type. You look at a tire to get the size: 225, 50, R, 16, 92, H. All the way to the Fort Wayne service center you keep repeating it over and over. You even say it over in your mind while waiting in line. Then you get to the counter and the manager asks what size you need. Then your mind goes blank.

Tire size can be confusing for many Fort Wayne drivers. There's so much on the side of the tire, and it's hard to keep straight.

Even though there's a lot on a tire - if you know what it all means, it's actually more helpful than confusing for Fort Wayne tire shoppers. Let's start with the size number.

For example, let's say a tire reads: 225 50 R 16 92 H. The 225 part is the width of the tire in millimeters - the width between the sidewalls of an inflated tire with no load. The 50 is the aspect ratio - the ratio of the sidewall height to the tread width. Off-road tires will have a higher number and high performance tires will have a lower number.

The R signifies it's a radial tire. And 16 is the rim or wheel size in inches.

The 92 is the load rating index - it's the load carrying capacity of a tire. The higher the number, the more it can safely carry. Your empty vehicle can be safe with a lower number, but you'll need a higher rating if you routinely haul heavy loads around Fort Wayne. The next letter is the speed rating. Not all tires sold in Fort Wayne are speed rated. The ratings generally follow the alphabet: the further up the alphabet, the higher the speed rating - with the exception of H - it comes between U and V (don't ask why).

There's a lot of fine print that most Fort Wayne area drivers probably need a magnifying glass to read. But there are a couple of other large print items of interest. One is the tread type: highway, mud and snow, all season, severe snow, etc.

And then there are the Uniform Tire Quality Grading System markings. The first is a tread wear index. 100 is the base line - a lower number is poorer and a higher number is better. All things being equal, a tire rated 200 would wear twice as long, on a government test track, than one rated at 100. These wear grades are only valid within the manufacturers product line - you can't compare with others. And it's important to note that a lower rating might be just what you want - a high performance, sticky tire has a softer rubber compound and won't wear as long, but boy, will it take those corners on twisting IN roads.

The next is a traction grade. This measures the tire's ability to stop on wet pavement in government tests. A - the best, B - intermediate, C - acceptable.

Temperature grade measures a tire's resistance to heat buildup in government tests. A, B and C - from best to acceptable.

It's safe for Fort Wayne drivers to go with the vehicle manufacturers original equipment recommendations that came on your car. But if you want to make adjustments, you'll now be better equipped to communicate with your friendly and knowledgeable Ed's Car Care Center tire professional.

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com